VBOX Video Loggers
Performance Meters & Lap Timers
Accessories
-
The camera clamp for Video VBOX cameras only (will not fit a VBOX HD2 camera) connects to a VBOX suction or roll cage mount and allows for greater articulation of the cameras. This is especially useful if the cameras need dropping far enough to gain a good view through the windscreen. -
This high-contrast OLED display is housed in a IP65 waterproof aluminium casing and connects to a VBOX Video HD2 via a 3.5 m flying lead. The screen is readable in bright sunlight, ensuring the visibility of parameters such as speed, G-force, lap times, and predictive lap timing as you drive. Six LEDs positioned above the screen offer immediate delta velocity feedback, indicating your current speed in comparison to your fastest lap. -
Replacement magnetic patch antenna for Video VBOX Lite with 3 m cable and MXC connector; requires a ground plane. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. The cable is available in 2m length. -
32 GB Class 10 Micro SD Card for VBOX Video HD2 -
This harness bar mount for 1 5/8" (41.275 mm) roll cages is compatible with both HDMI and non-HDMI VBOX Video HD2 systems. -
If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
The 92° lens for the Video VBOX high resolution cameras allows a wider field of view than the 54° lens. -
This package contains all the accessories required to install a VBOX Video HD2 in to a second vehicle, therefore allowing the user to transfer the main unit between the two vehicles. -
The VBOX CAN Gateway allows logging of vehicle CAN bus data in a VBOX system where secondary CAN modules such as the OLED display or analogue input modules are used. -
Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Unterminated CAN Interface Cable for Video VBOX and VBOX Video HD2 that allows for bare wire connection to the CAN High and CAN Low wires in a vehicle's wiring loom. -
With its quick-release catches, the mounting bracket allows for the VBOX Video HD2 to be secured in the car but also quickly removed. -
Protective lens cover for an HD2 1080p camera. -
This heavy-duty, low-vibration suction mount has a 4-hole AMPS head that fits to a VBOX Sport, Performance Box Touch and VBOX Touch. It measures 6.5 inches high and is made of a combination of plastic and glass fibre. The 80 mm suction base works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle. -
The OLED Secondary Pit Display acts as a secondary display to the VBOX Pit Lane Timer, mirroring the stationary countdown time to make this information easily available to the pit crew. -
6AH Li-ion battery pack and US/EU/AU/UK charger. Comes with a 1.5 m flying lead for connection to all VBOX video loggers (Video VBOX HD2, Video VBOX Pro, Video VBOX Lite, HD Lite) or VBOX LapTimer. -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Heavy-duty suction mount for use with Video VBOX Cameras, VBOX LapTimer or OLED Display. -
HDMI cable for use with VBOX Video HD2. HDMI male to HDMI male, 2 m. -
Replacement glass lens cover for the Video VBOX high resolution cameras.
