VBOX Video Loggers
Performance Meters & Lap Timers
Accessories
-
32 GB Micro SD Card for VBOX HD Lite, Class 10 U3 / V30 -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
Our miniature OLED display can show a wide range of parameters, including live and max speed, lap times, and predictive lap timing. It is readable in bright sunlight, has an IP65 waterproof aluminium housing and additional LEDs to indicate your speed relative to your fastest lap. A video logger is required to operate, and can be connected via the 2 m flying lead. -
The OLED Secondary Pit Display acts as a secondary display to the VBOX Pit Lane Timer, mirroring the stationary countdown time to make this information easily available to the pit crew. -
This heavy-duty, low-vibration suction mount has a 4-hole AMPS head that fits to a VBOX Sport, Performance Box Touch and VBOX Touch. It measures 6.5 inches high and is made of a combination of plastic and glass fibre. The 80 mm suction base works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket. -
The camera clamp for Video VBOX cameras only (will not fit a VBOX HD2 camera) connects to a VBOX suction or roll cage mount and allows for greater articulation of the cameras. This is especially useful if the cameras need dropping far enough to gain a good view through the windscreen. -
If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help. -
3.5 m cable to connect a VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2. Whilst VBOX LapTimer is a standalone GPS data logger, it can be used in conjunction with a VBOX video logger, which then eliminates the requirement of using two antennas. -
With its quick-release catches, the mounting bracket allows for the VBOX Video HD2 to be secured in the car but also quickly removed. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. The cable is available in 2m length.
