Performance Meters & Lap Timers
Accessories
-
The 92° lens for the Video VBOX high resolution cameras allows a wider field of view than the 54° lens. -
This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. -
32 GB Micro SD Card for VBOX HD Lite, Class 10 U3 / V30 -
This GNSS (GPS/GLONASS/Galileo) antenna with RG-174 & SMA connector and 3 m cable is IP67 rated and suitable for the following products: - VBOX Video HD2 - VBOX Touch - Mini Lap Timer - Mini Pit Lap Timer - 25 Hz VBOX Lap Timer (black front panel)* - 25 Hz VBOX Pit Lane Timer (black front panel)* -
3.5 m cable to connect a VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2. Whilst VBOX LapTimer is a standalone GPS data logger, it can be used in conjunction with a VBOX video logger, which then eliminates the requirement of using two antennas. -
2 m CAN connection cable for vehicles that have CAN available from the OBDII socket. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
The camera clamp for Video VBOX cameras only (will not fit a VBOX HD2 camera) connects to a VBOX suction or roll cage mount and allows for greater articulation of the cameras. This is especially useful if the cameras need dropping far enough to gain a good view through the windscreen. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. The cable is available in 2m length. -
If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help. -
Unterminated CAN Interface Cable for Video VBOX and VBOX Video HD2 that allows for bare wire connection to the CAN High and CAN Low wires in a vehicle's wiring loom. -
6-Pin Mini DIN to 6-Pin Mini DIN Micro Input Module comms cable (2 m) for Video VBOX Lite.
