VBOX Accessories
-
The camera clamp for Video VBOX cameras only (will not fit a VBOX HD2 camera) connects to a VBOX suction or roll cage mount and allows for greater articulation of the cameras. This is especially useful if the cameras need dropping far enough to gain a good view through the windscreen. -
Auxiliary power/ Cigarette lighter socket adapter for VBOX Sport and Performance Box Touch charger cable. -
Replacement glass lens cover for the Video VBOX high resolution cameras. -
32 GB Micro SD Card for VBOX HD Lite, Class 10 U3 / V30 -
Memory card suitable for Video VBOX (SD video logger) and performance meters such as the Performance Box Touch, VBOX Sport or VBOX LapTimer. -
The 92° lens for the Video VBOX high resolution cameras allows a wider field of view than the 54° lens. -
HDMI cable for use with VBOX Video HD2. HDMI male to HDMI male, 2 m. -
6-Pin Mini DIN to 6-Pin Mini DIN Micro Input Module comms cable (2 m) for Video VBOX Lite. -
Protective lens cover for an HD2 1080p camera. -
32 GB Class 10 Micro SD Card for VBOX Video HD2 -
If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help. -
2 m power cable for connection to an in-car 12V auxiliary or cigar lighter socket. -
Mono microphone with 3.5 mm jack plug (2.5 m cable). Compatible with VBOX Video HD2 if used with audio splitter cable (RLCAB132). -
This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. -
Replacement battery for VBOX Sport (and Video VBOX Lite). -
Protective lens cover for VBOX HD Lite. Simply push the lens cover on to the camera lens. -
This heavy-duty, low-vibration suction mount has a 4-hole AMPS head that fits to a VBOX Sport, Performance Box Touch and VBOX Touch. It measures 6.5 inches high and is made of a combination of plastic and glass fibre. The 80 mm suction base works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle. -
Replacement magnetic patch antenna for Video VBOX Lite with 3 m cable and MXC connector; requires a ground plane. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
This GNSS (GPS/GLONASS/Galileo) antenna with RG-174 & SMA connector and 3 m cable is IP67 rated and suitable for the following products: - VBOX Video HD2 - VBOX Touch - Mini Lap Timer - Mini Pit Lap Timer - 25 Hz VBOX Lap Timer (black front panel)* - 25 Hz VBOX Pit Lane Timer (black front panel)* -
This GNSS (GPS/GLONASS) antenna with RG-174 & MCX male connector and 2 m cable is suitable for the following products: - VBOX Sport - VBOX LapTimer (V1/ V2)* - VBOX Pit Lane Timer (V1)* - VBOX HD Lite - Performance Box Touch -
Replacement magnetic patch antenna for Video VBOX Pro with 5 m cable and SMA connector; requires a ground plane. -
Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
6-PIN Mini DIN to 9-PIN D-Type CAN interface cable (1m) for use with Video VBOX Lite. -
3 m extension cable for the Video VBOX Lite cameras. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. You can choose between a 2 m and a 3 m cable. -
HD2 mono microphone with LEMO plug. -
2 m CAN connection cable for vehicles that have CAN available from the OBDII socket. -
CAN connection cable for Video VBOX Lite (only), used for vehicles that have CAN available from the OBDII socket. -
Extension cable for the Video VBOX Pro cameras. -
Heavy-duty suction mount for use with Video VBOX Cameras, VBOX LapTimer or OLED Display. -
Start/stop logging switch for Video VBOX with a cable length of 2 m. Please choose between the following options: -
3.5 m cable to connect a VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2. Whilst VBOX LapTimer is a standalone GPS data logger, it can be used in conjunction with a VBOX video logger, which then eliminates the requirement of using two antennas. -
UK mains power supply for Video VBOX Pro, VBOX LapTimer, VBOX Pit Lane Timer, VBOX Video HD2, and VBOX Touch. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket.
