VBOX Accessories
-
This package contains all the accessories required to install a VBOX Video HD2 in to a second vehicle, therefore allowing the user to transfer the main unit between the two vehicles. -
The OLED Pit Display acts as a secondary display to the VBOX Pit Lane Timer, mirroring the stationary countdown time to make this information easily available to the pit crew. -
This high-contrast display is housed in a IP65 waterproof aluminium casing and connects to a VBOX Video HD2 via a 3.5 m flying lead. The screen is readable in bright sunlight, ensuring the visibility of parameters such as speed, G-force, lap times, and predictive lap timing as you drive. Six LEDs positioned above the screen offer immediate delta velocity feedback, indicating your current speed in comparison to your fastest lap. -
Our miniature OLED display can show a wide range of parameters, including live and max speed, lap times, and predictive lap timing. It is readable in bright sunlight, has an IP65 waterproof aluminium housing and additional LEDs to indicate your speed relative to your fastest lap. A video logger is required to operate, and can be connected via the 2 m flying lead. -
The VBOX CAN Gateway allows logging of vehicle CAN bus data in a VBOX system where secondary CAN modules such as the OLED display or analogue input modules are used. -
Sony 580TVL PAL high resolution bullet camera and windscreen suction mount for Video VBOX Pro. Camera cable length = 3 m. -
Start/stop logging switch for Video VBOX with a cable length of 2 m. Please choose between the following options: -
6AH Li-ion battery pack and US/EU/AU/UK charger. Comes with a 1.5 m flying lead for connection to all VBOX video loggers (Video VBOX HD2, Video VBOX Pro, Video VBOX Lite, HD Lite) or VBOX LapTimer. -
5-PIN LEMO to 9-PIN D-Type CAN interface cable (1m) for use with VBOX Video HD2. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket. -
VBOX HD Lite 2 m CAN connection and power cable for vehicles that have CAN available from the OBDII socket. -
UK mains power supply for Video VBOX Pro, VBOX LapTimer, VBOX Pit Lane Timer, VBOX Video HD2, and VBOX Touch. -
3.5 m cable to connect a VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2. Whilst VBOX LapTimer is a standalone GPS data logger, it can be used in conjunction with a VBOX video logger, which then eliminates the requirement of using two antennas. -
CAN connection cable for Video VBOX Lite (only), used for vehicles that have CAN available from the OBDII socket. -
Heavy-duty suction mount for use with Video VBOX Cameras, VBOX LapTimer or OLED Display. -
Extension cable for the Video VBOX Pro cameras. -
2 m CAN connection cable for vehicles that have CAN available from the OBDII socket. -
HD2 mono microphone with LEMO plug. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. You can choose between a 2 m and a 3 m cable. -
3 m extension cable for the Video VBOX Lite cameras. -
6-PIN Mini DIN to 9-PIN D-Type CAN interface cable (1m) for use with Video VBOX Lite. -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Replacement magnetic patch antenna for Video VBOX Pro with 5 m cable and SMA connector; requires a ground plane. -
This GNSS (GPS/GLONASS) antenna with RG-174 & MCX male connector and 2 m cable is suitable for the following products: - VBOX Sport - VBOX LapTimer (V1/ V2)* - VBOX Pit Lane Timer (V1)* - VBOX HD Lite - Performance Box Touch -
This GNSS (GPS/GLONASS/Galileo) antenna with RG-174 & SMA connector and 3 m cable is IP67 rated and suitable for the following products: - VBOX Video HD2 - VBOX Touch - Mini Lap Timer - Mini Pit Lap Timer - 25 Hz VBOX Lap Timer (black front panel)* - 25 Hz VBOX Pit Lane Timer (black front panel)* -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
Replacement magnetic patch antenna for Video VBOX Lite with 3 m cable and MXC connector; requires a ground plane.
