VBOX Accessories
-
Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
This package contains all the accessories required to install a VBOX Video HD2 in to a second vehicle, therefore allowing the user to transfer the main unit between the two vehicles. -
Replacement battery for VBOX Sport (and Video VBOX Lite). -
3.5 m cable to connect a VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2. Whilst VBOX LapTimer is a standalone GPS data logger, it can be used in conjunction with a VBOX video logger, which then eliminates the requirement of using two antennas. -
The VBOX CAN Gateway allows logging of vehicle CAN bus data in a VBOX system where secondary CAN modules such as the OLED display or analogue input modules are used. -
This heavy-duty, low-vibration suction mount has a 4-hole AMPS head that fits to a VBOX Sport, Performance Box Touch and VBOX Touch. It measures 6.5 inches high and is made of a combination of plastic and glass fibre. The 80 mm suction base works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle. -
The OLED Pit Display acts as a secondary display to the VBOX Pit Lane Timer, mirroring the stationary countdown time to make this information easily available to the pit crew. -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. -
Start/stop logging switch for Video VBOX with a cable length of 2 m. Please choose between the following options: -
Protective lens cover for VBOX HD Lite. Simply push the lens cover on to the camera lens. -
Protective lens cover for an HD2 1080p camera. -
This high-contrast display is housed in a IP65 waterproof aluminium casing and connects to a VBOX Video HD2 via a 3.5 m flying lead. The screen is readable in bright sunlight, ensuring the visibility of parameters such as speed, G-force, lap times, and predictive lap timing as you drive. Six LEDs positioned above the screen offer immediate delta velocity feedback, indicating your current speed in comparison to your fastest lap. -
CAN connection cable for Video VBOX Lite (only), used for vehicles that have CAN available from the OBDII socket. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket. -
2 m CAN connection cable for vehicles that have CAN available from the OBDII socket. -
VBOX HD Lite 2 m CAN connection and power cable for vehicles that have CAN available from the OBDII socket. -
Our miniature OLED display can show a wide range of parameters, including live and max speed, lap times, and predictive lap timing. It is readable in bright sunlight, has an IP65 waterproof aluminium housing and additional LEDs to indicate your speed relative to your fastest lap. A video logger is required to operate, and can be connected via the 2 m flying lead. -
HD2 mono microphone with LEMO plug. -
Mono microphone with 3.5 mm jack plug (2.5 m cable). Compatible with VBOX Video HD2 if used with audio splitter cable (RLCAB132). -
6-Pin Mini DIN to 6-Pin Mini DIN Micro Input Module comms cable (2 m) for Video VBOX Lite. -
UK mains power supply for Video VBOX Pro, VBOX LapTimer, VBOX Pit Lane Timer, VBOX Video HD2, and VBOX Touch. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. You can choose between a 2 m and a 3 m cable. -
2 m power cable for connection to an in-car 12V auxiliary or cigar lighter socket. -
Sony 580TVL PAL high resolution bullet camera and windscreen suction mount for Video VBOX Pro. Camera cable length = 3 m. -
Heavy-duty suction mount for use with Video VBOX Cameras, VBOX LapTimer or OLED Display. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
HDMI cable for use with VBOX Video HD2. HDMI male to HDMI male, 2 m.
