Video Loggers2025-01-31T17:00:19+00:00

Performance Meters & Lap Timers

Accessories

  • 32 GB Micro SD Card

    £10.00 Ex VAT
    32 GB Micro SD Card for VBOX HD Lite, Class 10 U3 / V30
  • OBDII CAN Cable

    From £90.00 Ex VAT
    CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sony 580TVL PAL high resolution bullet camera and windscreen suction mount for Video VBOX Pro. Camera cable length = 3 m.
  • GNSS Antenna

    £30.00 Ex VAT
    This GNSS (GPS/GLONASS/Galileo) antenna with RG-174 & SMA connector and 3 m cable is IP67 rated and suitable for the following products: - VBOX Video HD2 - VBOX Touch - Mini Lap Timer - Mini Pit Lap Timer - 25 Hz VBOX Lap Timer (black front panel)* - 25 Hz VBOX Pit Lane Timer (black front panel)*
  • This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera.
  • In-car Power Supply

    From £15.00 Ex VAT
    2 m power cable for connection to an in-car 12V auxiliary or cigar lighter socket.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • HDMI cable for use with VBOX Video HD2. HDMI male to HDMI male, 2 m.
  • Roll Cage Bracket

    £15.00 Ex VAT
    This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage.
  • Mini OLED Display

    From £440.00 Ex VAT
    Our miniature OLED display can show a wide range of parameters, including live and max speed, lap times, and predictive lap timing. It is readable in bright sunlight, has an IP65 waterproof aluminium housing and additional LEDs to indicate your speed relative to your fastest lap. A video logger is required to operate, and can be connected via the 2 m flying lead.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Unterminated CAN Interface Cable for Video VBOX and VBOX Video HD2 that allows for bare wire connection to the CAN High and CAN  Low wires in a vehicle's wiring loom.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Battery Pack

    £190.00 Ex VAT
    6AH Li-ion battery pack and US/EU/AU/UK charger. Comes with a 1.5 m flying lead for connection to all VBOX video loggers (Video VBOX HD2, Video VBOX Pro, Video VBOX Lite, HD Lite) or VBOX LapTimer.
  • 6-PIN Mini DIN to 9-PIN D-Type CAN interface cable (1m) for use with Video VBOX Lite.
  • UK mains power supply for Video VBOX Pro, VBOX LapTimer, VBOX Pit Lane Timer, VBOX Video HD2, and VBOX Touch.
  • 2 m CAN connection cable for vehicles that have CAN available from the OBDII socket.
  • 5-PIN LEMO to 9-PIN D-Type CAN interface cable (1m) for use with VBOX Video HD2.
  • If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help.
  • Suction Mount

    £20.00 Ex VAT
    This heavy-duty, low-vibration suction mount has a 4-hole AMPS head that fits to a VBOX Sport, Performance Box Touch and VBOX Touch. It measures 6.5 inches high and is made of a combination of plastic and glass fibre. The 80 mm suction base works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.
  • Replacement magnetic patch antenna for Video VBOX Lite with 3 m cable and MXC connector; requires a ground plane.
  • 6-Pin Mini DIN to 6-Pin Mini DIN Micro Input Module comms cable (2 m) for Video VBOX Lite.
  • Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display.
  • GNSS Antenna

    £30.00 Ex VAT
    This GNSS (GPS/GLONASS) antenna with RG-174 & MCX male connector and 2 m cable is suitable for the following products: - VBOX Sport - VBOX LapTimer (V1/ V2)* - VBOX Pit Lane Timer (V1)* - VBOX HD Lite - Performance Box Touch
  • OLED Display

    £450.00 Ex VAT
    This high-contrast OLED display is housed in a IP65 waterproof aluminium casing and connects to a VBOX Video HD2 via a 3.5 m flying lead. The screen is readable in bright sunlight, ensuring the visibility of parameters such as speed, G-force, lap times, and predictive lap timing as you drive. Six LEDs positioned above the screen offer immediate delta velocity feedback, indicating your current speed in comparison to your fastest lap.
Go to Top