VBOX Video Loggers
-
This Track Package includes roll cage camera mounts and an un-terminated power cable, which allows for easier fitting in fully race-prepared vehicles. -
VBOX Video HD2 is the ultimate video data logging system designed for those looking to improve lap times and achieve greater consistency while driving. This system is ideal for motorsport enthusiasts and professionals alike, offering a range of high-tech features.
Performance Meters & Lap Timers
-
VBOX Pit Lane Timer takes the guesswork out of the crucial pit stop period of an endurance race. It recognises the preset pit lane entry point as it is crossed, displays your speed until the car comes to a stop, and then counts down to zero to indicate when it is time to get out again. -
VBOX Mini LapTimer is a 10 Hz GNSS data logger and lap timing display in one. Its miniature design means that it is ideal for applications where there is limited space to mount lap timing devices, such as in a single-seater race car. The Mini LapTimer provides instant feedback on the screen and via the bright LEDs, indicating where time is being lost and where time can be gained around a circuit. -
This pit lane timer has a much smaller form factor than the original VBOX Pit Lane Timer and can be used in vehicles where there is no space to mount a full-size display. The display itself is only 50 mm x 50 mm x 27 mm, which allows you to mount the device in tight spaces. VBOX Mini Pit Lane Timer retains the full functionality of the original larger display, including the ability to log a summary of pit stop times to the on-board SD card for post session review. -
The VBOX Sport will allow you to instantly analyse your driving performance, giving you immediate access to the data you need to go faster. The six-hour battery life will cater for most sporting events; and because the VBOX Sport weighs only 130 g, there will be no weight penalty for using it. -
VBOX LapTimer is a 25 Hz GNSS data logger and predictive lap timer display in one. It provides instant driver feedback, helping you find where time is being lost and where time can be gained around a track. You can choose between two options: the S version, which features a side connector for easy movement between vehicles and flexible installation, or the R version, which has a rear connector and a sleek, slightly slimmer design for more permanent installations.
Accessories
-
If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help. -
Our miniature OLED display can show a wide range of parameters, including live and max speed, lap times, and predictive lap timing. It is readable in bright sunlight, has an IP65 waterproof aluminium housing and additional LEDs to indicate your speed relative to your fastest lap. A video logger is required to operate, and can be connected via the 2 m flying lead. -
Replacement battery for VBOX Sport (and Video VBOX Lite). -
Start/stop logging switch for Video VBOX with a cable length of 2 m. Please choose between the following options: -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Protective lens cover for an HD2 1080p camera. -
6-PIN Mini DIN to 9-PIN D-Type CAN interface cable (1m) for use with Video VBOX Lite. -
Replacement glass lens cover for the Video VBOX high resolution cameras. -
32 GB Class 10 Micro SD Card for VBOX Video HD2 -
UK mains power supply for Video VBOX Pro, VBOX LapTimer, VBOX Pit Lane Timer, VBOX Video HD2, and VBOX Touch. -
The VBOX CAN Gateway allows logging of vehicle CAN bus data in a VBOX system where secondary CAN modules such as the OLED display or analogue input modules are used. -
This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. -
This GNSS (GPS/GLONASS/Galileo) antenna with RG-174 & SMA connector and 3 m cable is IP67 rated and suitable for the following products: - VBOX Video HD2 - VBOX Touch - Mini Lap Timer - Mini Pit Lap Timer - 25 Hz VBOX Lap Timer (black front panel)* - 25 Hz VBOX Pit Lane Timer (black front panel)* -
The camera clamp for Video VBOX cameras only (will not fit a VBOX HD2 camera) connects to a VBOX suction or roll cage mount and allows for greater articulation of the cameras. This is especially useful if the cameras need dropping far enough to gain a good view through the windscreen. -
Unterminated CAN Interface Cable for Video VBOX and VBOX Video HD2 that allows for bare wire connection to the CAN High and CAN Low wires in a vehicle's wiring loom. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
2 m CAN connection cable for vehicles that have CAN available from the OBDII socket. -
5-PIN LEMO to 9-PIN D-Type CAN interface cable (1m) for use with VBOX Video HD2. -
This high-contrast display is housed in a IP65 waterproof aluminium casing and connects to a VBOX Video HD2 via a 3.5 m flying lead. The screen is readable in bright sunlight, ensuring the visibility of parameters such as speed, G-force, lap times, and predictive lap timing as you drive. Six LEDs positioned above the screen offer immediate delta velocity feedback, indicating your current speed in comparison to your fastest lap. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket. -
Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Replacement magnetic patch antenna for Video VBOX Lite with 3 m cable and MXC connector; requires a ground plane. -
6-Pin Mini DIN to 6-Pin Mini DIN Micro Input Module comms cable (2 m) for Video VBOX Lite. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. The cable is available in 2m length.
