VBOX Video Loggers
-
This Track Package includes roll cage camera mounts and an un-terminated power cable, which allows for easier fitting in fully race-prepared vehicles. -
VBOX Video HD2 is the ultimate video data logging system designed for those looking to improve lap times and achieve greater consistency while driving. This system is ideal for motorsport enthusiasts and professionals alike, offering a range of high-tech features.
Performance Meters & Lap Timers
-
VBOX LapTimer is a 25 Hz GNSS data logger and predictive lap timer display in one. It provides instant driver feedback, helping you find where time is being lost and where time can be gained around a track. You can choose between two options: the S version, which features a side connector for easy movement between vehicles and flexible installation, or the R version, which has a rear connector and a sleek, slightly slimmer design for more permanent installations. -
VBOX Pit Lane Timer takes the guesswork out of the crucial pit stop period of an endurance race. It recognises the preset pit lane entry point as it is crossed, displays your speed until the car comes to a stop, and then counts down to zero to indicate when it is time to get out again. -
The VBOX Sport will allow you to instantly analyse your driving performance, giving you immediate access to the data you need to go faster. The six-hour battery life will cater for most sporting events; and because the VBOX Sport weighs only 130 g, there will be no weight penalty for using it. -
VBOX Mini LapTimer is a 10 Hz GNSS data logger and lap timing display in one. Its miniature design means that it is ideal for applications where there is limited space to mount lap timing devices, such as in a single-seater race car. The Mini LapTimer provides instant feedback on the screen and via the bright LEDs, indicating where time is being lost and where time can be gained around a circuit. -
This pit lane timer has a much smaller form factor than the original VBOX Pit Lane Timer and can be used in vehicles where there is no space to mount a full-size display. The display itself is only 50 mm x 50 mm x 27 mm, which allows you to mount the device in tight spaces. VBOX Mini Pit Lane Timer retains the full functionality of the original larger display, including the ability to log a summary of pit stop times to the on-board SD card for post session review.
Accessories
-
This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. -
Sony 580TVL PAL high resolution bullet camera and windscreen suction mount for Video VBOX Pro. Camera cable length = 3 m. -
Unterminated CAN Interface Cable for Video VBOX and VBOX Video HD2 that allows for bare wire connection to the CAN High and CAN Low wires in a vehicle's wiring loom. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
5-PIN LEMO to 9-PIN D-Type CAN interface cable (1m) for use with VBOX Video HD2. -
6-Pin Mini DIN to 6-Pin Mini DIN Micro Input Module comms cable (2 m) for Video VBOX Lite. -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
Power cable connecting a VBOX HD Lite or VBOX Mini LapTimer to an in-car 12 V auxiliary or cigar lighter socket. The cable is available in 2m length. -
Replacement magnetic patch antenna for Video VBOX Lite with 3 m cable and MXC connector; requires a ground plane. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket. -
Start/stop logging switch for Video VBOX with a cable length of 2 m. Please choose between the following options: -
The OLED Pit Display acts as a secondary display to the VBOX Pit Lane Timer, mirroring the stationary countdown time to make this information easily available to the pit crew.
