VBOX Video Loggers
-
This Track Package includes roll cage camera mounts and an un-terminated power cable, which allows for easier fitting in fully race-prepared vehicles. -
VBOX Video HD2 is the ultimate video data logging system designed for those looking to improve lap times and achieve greater consistency while driving. This system is ideal for motorsport enthusiasts and professionals alike, offering a range of high-tech features.
Performance Meters & Lap Timers
-
This pit lane timer has a much smaller form factor than the original VBOX Pit Lane Timer and can be used in vehicles where there is no space to mount a full-size display. The display itself is only 50 mm x 50 mm x 27 mm, which allows you to mount the device in tight spaces. VBOX Mini Pit Lane Timer retains the full functionality of the original larger display, including the ability to log a summary of pit stop times to the on-board SD card for post session review. -
The VBOX Sport will allow you to instantly analyse your driving performance, giving you immediate access to the data you need to go faster. The six-hour battery life will cater for most sporting events; and because the VBOX Sport weighs only 130 g, there will be no weight penalty for using it. -
VBOX Pit Lane Timer takes the guesswork out of the crucial pit stop period of an endurance race. It recognises the preset pit lane entry point as it is crossed, displays your speed until the car comes to a stop, and then counts down to zero to indicate when it is time to get out again. -
VBOX LapTimer is a 25 Hz GNSS data logger and predictive lap timer display in one. It provides instant driver feedback, helping you find where time is being lost and where time can be gained around a track. You can choose between two options: the S version, which features a side connector for easy movement between vehicles and flexible installation, or the R version, which has a rear connector and a sleek, slightly slimmer design for more permanent installations. -
VBOX Mini LapTimer is a 10 Hz GNSS data logger and lap timing display in one. Its miniature design means that it is ideal for applications where there is limited space to mount lap timing devices, such as in a single-seater race car. The Mini LapTimer provides instant feedback on the screen and via the bright LEDs, indicating where time is being lost and where time can be gained around a circuit.
Accessories
-
32 GB Class 10 Micro SD Card for VBOX Video HD2 -
Replacement glass lens cover for the Video VBOX high resolution cameras. -
The OLED Pit Display acts as a secondary display to the VBOX Pit Lane Timer, mirroring the stationary countdown time to make this information easily available to the pit crew. -
This camera clamp is designed specifically for a VBOX Video HD2 camera, ensuring that the camera remains intact even when fully tightened. It is made of aluminium with a rubber liner to safeguard the camera and is tightened using two M3 hex-socket screws (2.5 mm Allen key required). The clamp can be attached to either the Roll Cage Camera Mount (RLACS286) or the Suction Camera Mount (RLACS287) and provides a secure mounting option for the camera. -
The VBOX CAN Gateway allows logging of vehicle CAN bus data in a VBOX system where secondary CAN modules such as the OLED display or analogue input modules are used. -
5-PIN LEMO to 9-PIN D-Type CAN interface cable (1m) for use with VBOX Video HD2. -
The camera clamp for Video VBOX cameras only (will not fit a VBOX HD2 camera) connects to a VBOX suction or roll cage mount and allows for greater articulation of the cameras. This is especially useful if the cameras need dropping far enough to gain a good view through the windscreen. -
Our miniature OLED display can show a wide range of parameters, including live and max speed, lap times, and predictive lap timing. It is readable in bright sunlight, has an IP65 waterproof aluminium housing and additional LEDs to indicate your speed relative to your fastest lap. A video logger is required to operate, and can be connected via the 2 m flying lead. -
CAN connection cable for VBOX Video HD2 & Video VBOX Pro, used for vehicles that have CAN available from the OBDII socket. -
The 92° lens for the Video VBOX high resolution cameras allows a wider field of view than the 54° lens. -
Lightweight suction mount for Video VBOX cameras, HD2 cameras, and the VBOX LapTimer. NEW: A locking nut has been added to facilitate the fastening of the camera/display. -
2 m CAN connection cable for vehicles that have CAN available from the OBDII socket. -
CAN connection cable for Video VBOX Lite (only), used for vehicles that have CAN available from the OBDII socket. -
6AH Li-ion battery pack and US/EU/AU/UK charger. Comes with a 1.5 m flying lead for connection to all VBOX video loggers (Video VBOX HD2, Video VBOX Pro, Video VBOX Lite, HD Lite) or VBOX LapTimer. -
If you're struggling to get the forward-facing camera in the right position to allow for a good view of the track, this extension bar should help. -
This GNSS (GPS/GLONASS) antenna with RG-174 & MCX male connector and 2 m cable is suitable for the following products: - VBOX Sport - VBOX LapTimer (V1/ V2)* - VBOX Pit Lane Timer (V1)* - VBOX HD Lite - Performance Box Touch -
Mono microphone with 3.5 mm jack plug (2.5 m cable). Compatible with VBOX Video HD2 if used with audio splitter cable (RLCAB132). -
Start/stop logging switch for Video VBOX with a cable length of 2 m. Please choose between the following options: -
This heavy-duty, low-vibration suction mount has a 4-hole AMPS head that fits to a VBOX Sport, Performance Box Touch and VBOX Touch. It measures 6.5 inches high and is made of a combination of plastic and glass fibre. The 80 mm suction base works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle. -
Heavy-duty suction mount for use with Video VBOX Cameras, VBOX LapTimer or OLED Display. -
This is the lower part of the RLACS286 Roll Cage Mount. It includes the curved mounting bracket, two jubilee clips, four worm drive hose clips and a protective sheet. The elbow joint that screws directly into a Video VBOX camera is not included. The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. -
Sony 580TVL PAL high resolution bullet camera and windscreen suction mount for Video VBOX Pro. Camera cable length = 3 m. -
HDMI cable for use with VBOX Video HD2. HDMI male to HDMI male, 2 m. -
The roll cage mount has a solid aluminium body, connected to a curved mounting plate that is bolted to the bar via a pair of jubilee clips (2 supplied) or worm drive hose clips (four supplied). The clips are sufficient diameter so that these mounts can be used on an FIA specification roll cage. The kit also contains a strip of protective rubber to stop the roll bar from being scratched. NEW: A locking nut has been added to facilitate the fastening of the camera/display.
